![[Company Logo Image]](../AFMIT/../images/logo.gif){kind=logo}
[ TOC | Home | What's New | Products & Services | Dealers | Feedback ]
[ Back to USN MOSS IMOSS Support Page ]
1] Run WtCap:Configure
2] Load a similar configuration, such as the NOAA500N.CFG
3] Change the CAPTURE MODE to METEOR-APT
4] Change the FREQUENCY to 137300, for example, for METEOR 3-5
5] Change the CONFIGURATION NAME to something like METEOR 137.300
6] Save the Configuration as METEOR137300 or some similar name.
7] Exit Configure dialog.
To add this new configuration into the APT autoscan schedule...
8] Run WtCap:Schedule
9] Load the AutoNoaa schedule. It probably has just two entries, one for
each NOAA freq.
10] Autoscanning mode should be selected
11] Press Add
12] Select ACTIVE
13] For Load configuration, BROWSE to the METEOR137300 configuration file
you just created above.
14] Change SAVE ON PATH to something like ($BASE)\IMAGES\APT\METEOR, or
wherever you want to save the METEOR APT passes.
15] Exit the ADD/EDIT dialog
16] Save the new schedule; for example, as AUTOAPT
17] Exit the scheduler; the system should now autoscan NOAA plus METEOR
freqs.
Then, add METEOR 3-5 to the satellite data base
18] Run WtView:Misc:Sat Elements:Edit, then "Press any key..."
19] Using PgUp/PgDn keys, select page with unused or undefined SATELLITE in
column heading.
20] Using arrow keys, move cursor to SATELLITE name, and press enter key.
21] Enter METEOR 3-5 and press enter key
22] Press F9, then F10 function keys.